eAuto · Trusted by Mechanics. Built for Riders. eAuto Fuel Pump Assembly for Yamaha MT-15 V1 (2019–2021) | MT-15 V2 (2022–Present) | R15 V4 (2021–Present) | 155cc BS6 VVA The eAuto fuel pump assembly covers Yamaha's current-generation 155cc BS6 platform — the R15 V4 and both generations of the MT-15. All three models share the same 155cc liquid-cooled VVA BS6 engine architecture and compatible fuel system. Whether you ride the track-focused R15 V4, the street-naked MT-15 V1, or the updated MT-15 V2, a single eAuto assembly covers your bike. Every eAuto unit is tested for correct fuel pressure output and electrical function before dispatch from eAuto.co.in. eAuto Key Specs: 155cc Liquid-Cooled VVA FI BS6 | MT-15 V1 / MT-15 V2 / R15 V4 | 2019–Present | Complete Assembly ✅ eAuto Verified Fitment — Fits These Models Model Year Range Engine Yamaha MT-15 V1 2019–2021 155cc, Liquid-Cooled, SOHC, VVA, FI, BS6, 6-Speed Yamaha MT-15 V2 2022–Present 155cc, Liquid-Cooled, SOHC, VVA, FI, BS6, 6-Speed Yamaha YZF-R15 V4 Standard 2021–Present 155cc, Liquid-Cooled, SOHC, VVA, FI, BS6, 6-Speed, Dual-Ch ABS Yamaha YZF-R15 V4 Dark Knight 2021–Present 155cc, Liquid-Cooled, SOHC, VVA, FI, BS6, 6-Speed, Dual-Ch ABS Yamaha YZF-R15 V4 Dual Tone 2022–Present 155cc, Liquid-Cooled, SOHC, VVA, FI, BS6, 6-Speed, Dual-Ch ABS Yamaha YZF-R15M 2021–Present 155cc, Liquid-Cooled, SOHC, VVA, FI, BS6, 6-Speed, Dual-Ch ABS + QS + TCR ⚠ Does NOT Fit — Do Not Order For These Models Model Reason Yamaha R15 V3 BS4/BS6 (2018–2021) Previous generation with different tank — eAuto makes a separate V3 assembly Yamaha R15 V1 (2008–2011) 149cc platform — completely different fuel system Yamaha R15 V2 / R15 S (2011–2017) 149cc platform — not compatible Yamaha FZ-S V3 / FZS 25 / FZ25 Different naked bike platforms with different tanks Yamaha Aerox 155 Scooter platform — not compatible with this motorcycle assembly Technical Specifications Brand eAuto — Trusted by Mechanics. Built for Riders. Part Type Fuel Pump Assembly — Complete In-Tank Module (फ्यूल पंप असेंबली / ईंधन पंप असेंबली) Compatible Models Yamaha MT-15 V1 | MT-15 V2 | R15 V4 Standard | R15 V4 Dark Knight | R15 V4 Dual Tone | R15M Engine 155cc, Liquid-Cooled, SOHC, Single-Cylinder, VVA, Fuel-Injected, BS6 Transmission 6-Speed Manual with Slipper Clutch Year Range MT-15 V1: 2019–2021 | MT-15 V2: 2022–Present | R15 V4: 2021–Present Emission Standard BS6 Compliant ABS Compatibility Fits all R15 V4 variants (dual-channel ABS) — ABS is independent of fuel pump Fuel Pressure Output ~2.5–3.0 kgf/cm² Quality Standard eAuto tested — fuel pressure output and electrical function verified before dispatch Sold By eAuto.co.in — Trusted by Mechanics. Built for Riders. Package Contents 1 Set × eAuto Fuel Pump Assembly for Yamaha MT-15 V1/V2 / R15 V4 (2019–Present) ⚠️ When to Replace If your Yamaha MT-15 or R15 V4 is showing any of these symptoms, the fuel pump assembly may need attention. The 155cc BS6 VVA engine is sensitive to fuel pressure variations — early replacement prevents bigger problems. VVA not engaging cleanly at 7,400 RPM — The R15 V4 and MT-15 VVA system requires consistent fuel pressure to activate correctly. A weakening pump causes a flat spot instead of the characteristic surge at the VVA crossover point. No priming buzz on ignition — The pump should buzz briefly when you turn the key. Silence means the motor isn't activating — most common and definitive failure indicator. Traction control (R15 V4 / R15M) activating abnormally — Inconsistent fuel pressure can cause RPM fluctuations that trigger the traction control system unnecessarily — especially noticeable at low speeds. Engine stalls in stop-and-go traffic — Strainer clogging starves the engine
